No Days Fused Glass Coaster Project Sheet

To download the pdf, visit Streuter's project gallery.

The No Days Fused Glass Coaster Project is a perfect introduction to No Days Liquid Fusing Adhesive and No Days Fusing Adhesive Squares. This project can be completed in about an hour. The templates for the frit painting is below:

To download the pdf, visit Streuter's project gallery.

Find more project sheets at Streuter.com.



Full fuse firing schedule for coaster (the layers of glass will melt together and have no texture left):

Full Fuse
300 dph	600º F	30 min
300 dph	1000º F	30 min
300 dph	1100º F	10 min
50 dph	1250º F	20 min
500 dph	1480º F	10 min
AFAP	960º F	45 min
100 dph	800º F	0 min
200 dph	700º F	0 min
400 dph	100º F	0 min

[Assumptions: 2 layers of standard thickness glass (3mm or 1/8") stacked to make a thickness of 6mm or 1/4"] 

The firing schedule is fairly conservative, so you shouldn't have any breakage.  However, please note that this firing schedule is just a general guideline.  It is up to the user to take into acount their glass fusing setup and design, materials used and kiln being used to yield their desired results.  

dph = degrees per hour (Fahrenheit)
AFAP = as fast as possible, represented by 9999 when programming your kiln
min = minutes